The phenomenon of tool wear refers to the gradual elimination of material from the cutting edge. In the case of carbide tipped tools, this process occurs through the means of abrasion, heat, adhesion, or mechanical impact. It is important to understand how this phenomenon occurs, since this will help you…

When selecting a gear cutter, there are three factors that must be related to the gear that is to be cut: module (or diametral pitch), pressure angle, and cutter number, with a range of teeth that includes the required number of teeth. The module and pressure angle must be exact.…

There are seven things to be mindful of before purchasing a magnetic drill machine: magnetic holding force, drilling capacity, power of the motor, speed control, shape of the annular cutter and fit of the arbor, safety features, and the warranty or support. You need to start with your own work.…

To maximize mounted point performance when used in high-speed grinding, ensure that the point is not operated above its stipulated RPM, the abrasive used is appropriate for the workpiece, the shank is kept short and straight, only light pressure is applied, and the point is dressed or replaced whenever it…

There is no common figure of hours or components applicable to each carbide pointing tool. Tool life indicates the time of cutting till the edge gets worn out beyond the point defined by you. The mentioned period is dependent on material characteristics, speed, feed, cutting depth, coolant, machine rigidity, and…

For finishing stainless steel and hardened alloys, INOX-specific resin-bonded mounted points made with zirconia alumina or ceramic alumina grain, shaped as A-points or ball or cone profiles, give the cleanest results with the least heat buildup. A standard aluminium oxide point is fine on mild steel. Stainless needs a bond…

There are primarily four causes for a carbide tool failure, namely improper cutting parameters, improper tool selection for the specific material being cut, insufficient cooling or chip removal, and machine rigidity problems. Chipping, early wear, thermal cracks, and sudden breakage are the main types of failures faced by shops, which…