To maximize mounted point performance when used in high-speed grinding, ensure that the point is not operated above its stipulated RPM, the abrasive used is appropriate for the workpiece, the shank is kept short and straight, only light pressure is applied, and the point is dressed or replaced whenever it…

There is no common figure of hours or components applicable to each carbide pointing tool. Tool life indicates the time of cutting till the edge gets worn out beyond the point defined by you. The mentioned period is dependent on material characteristics, speed, feed, cutting depth, coolant, machine rigidity, and…

For finishing stainless steel and hardened alloys, INOX-specific resin-bonded mounted points made with zirconia alumina or ceramic alumina grain, shaped as A-points or ball or cone profiles, give the cleanest results with the least heat buildup. A standard aluminium oxide point is fine on mild steel. Stainless needs a bond…

There are primarily four causes for a carbide tool failure, namely improper cutting parameters, improper tool selection for the specific material being cut, insufficient cooling or chip removal, and machine rigidity problems. Chipping, early wear, thermal cracks, and sudden breakage are the main types of failures faced by shops, which…

A gear cutter is a device that has cutting teeth that shape the gear teeth in a round piece of plastic, metal, or sometimes nylon composite material. The tool functions by cutting the required material from the blank by following a specific pattern that reflects the shape of a gear…

Carbide-tipped cutting tools are used by many industries in Dubai, including aerospace, oil and gas, automotive, construction, and precision engineering, because regular steel tools can’t carve through titanium, stainless steel, and other hardened alloys. If you want to keep your machine shop profitable in that environment, you need to work…

According to the topic, the answer is no; that doesn’t apply to metals. Standard shim stock made of stainless steel, brass, or aluminum conducts electricity. However, it’s a completely different story for non-metals. Materials like polyester (Mylar), phenolics, fish paper, and nylon are really used for electrical insulation in applications…